Anthem LTX 500 User Manual Page 37
- Page / 182
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
ENGLISH
37
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others
Input Signal > Aspect (Computer)
17
Aspect (Computer)
Confi gures the screen size of the projected image.
Auto
Enlarges the PC signal horizontally/vertically until it fi ts the panel height, and displays
it in the original aspect ratio.
1:1
Displays the PC signal corresponding to the panel at one dot per pixel ratio. The PC
screen can be shown in the original size.
Full Enlarges the PC signal horizontally/vertically.
● This setting can also be confi gured from the remote control. ( P16)
● This setting cannot be set in the case of SD or HD signals.
Input Signal > V-Stretch (when HD or SD video signals are input)
18
V-Stretch
When set to
On
, the projected 2.35:1 image will be stretched vertically to the panel resolution.
On The projected 2.35:1 image will be stretched vertically to the panel resolution.
Off Projects the 2.35:1 image as-is. (Black bands will be displayed on the top and bottom.)
● This setting cannot be set in the case of PC signals.
Input Signal > Over Scan
19
Over Scan
Selects whether or not to set over scan for the SD video signal.
On Over scan the top, left, bottom and right at 2.5% each.
Off Do not over scan.
●
This setting is not available when HD signal or PC signal is input.
Input Signal > Mask
20
Mask
Masks (Hides) the outer area of the projected image.
2.5% Mask 2.5% of the screen.
5% Mask 5% of the screen.
Off No masking.
● Masking is available only when high defi nition images are input.
Input Signal > Film Mode
21
Film Mode
Selects this to view movies shot on fi lm.
Auto For normal circumstances, select this setting.
Off Select this when you are not watching movies shot on fi lm.
●
This setting is not available when a progressive signal is input.
Off
On
- For Customer use : 1
- Safety Precautions 2
- THX Certifi cation 9
- Main Features 10
- Perfect for Any Location 11
- Contents 12
- How to Read this Manual/ 13
- Controls and features 14
- Bottom Surface 15
- Getting started 16
- Remote Control 16
- toward this unit 17
- When refl ecting off a screen 17
- Selecting Connecting Devices 18
- Connecting 19
- Connecting(Continued) 20
- RGB video output terminals 21
- Keystone. ( P38 23
- Left/Right position 23
- Installing the Projector and 24
- Screen(Continued) 24
- Projecting Image 26
- Turn off the power 27
- Project the image 28
- Mask the image 29
- Setting Menu 30
- Picture Adjust 31
- Setting Menu (Continued) 32
- Picture Adjust > Gamma 33
- Input Signal > HDMI 35
- Input Signal > COMP 35
- Input Signal > Over Scan 37
- Input Signal > Mask 37
- Input Signal > Film Mode 37
- Display Setup 39
- Function > Off Timer 41
- Information 41
- Customizing Projected Images 42
- Adjust picture quality 43
- Troubleshooting 44
- Are Displayed 46
- About Warning Indicators 47
- Replacing the Lamp 48
- Install the new lamp unit 49
- Attach the lamp cover 49
- Troubleshooting 50
- Remove the inner fi lter 51
- Reinstall the inner fi lter 51
- Clean the fi lter 51
- RS-232C Interface 52
- RS-232C Interface (Continued) 54
- Copyright and Caution 56
- Precautions for Mounting 57
- Specifi cations 58
- Specifi cations(Continued) 60
- MANUEL D’INSTRUCTIONS 61
- Pour commencer 62
- Certifi cation THX 69
- Principales caractéristiques 70
- Contenu 72
- Accessoires facultatifs 73
- Commandes et fonctionnalités 74
- Face inférieure 75
- Télécommande 76
- direction de l’appareil 77
- Préparation 78
- Raccordements 79
- Raccordements (Suite) 80
- Bornes de sortie vidéo RVB 81
- Projection d'images 86
- Eteingnez l’appareil 87
- Masquer l’image 89
- Pour terminer 89
- Menu de confi guration 90
- Qualité image 91
- Qualité image > Gamma 93
- Aspect (PC) 97
- Etirement V 97
- Surbalayage 97
- Menu de confi guration (suite) 100
- Fonction > Arrêt Auto 101
- Informations 101
- Sélectionner 102
- USER2USER1 103
- Dépannage 104
- Message Cause (Description) 106
- Dépannage 106
- FRANÇAIS 107
- Remplacement de la lampe 108
- Fixez le couvercle de lampe 109
- AVERTISSEMENT 110
- Retirez le fi ltre intérieur 111
- Nettoyez le fi ltre 111
- Interface RS-232C 112
- (suite) 114
- Fixation de l’appareil 117
- Caractéristiques 118
- Caractéristiques(suite) 120
- PROYECTOR LCOS 121
- MANUAL DE INSTRUCCIONES 121
- Precauciones De Seguridad 122
- ESPAÑOL/CASTELLANO 123
- Para comenzar 124
- Certifi cación THX 129
- Características principales 130
- Contenido 132
- Controles y características 134
- Superfi cie inferior 135
- Control remoto 136
- Preparación 138
- Conexiones 139
- Conexión (Continuación) 140
- Terminales de salida de 141
- Tamaño de la ima 145
- Proyección de imágenes 146
- Apague la unidad 147
- Proyecte la imagen 148
- Para terminar 149
- Menú de ajustes 150
- Ajustes Imagen 151
- Confi guración 152
- Temperatura color 152
- Avanzado 154
- Entrada señal > HDMI 155
- Entrada señal > COMP 155
- Entrada señal > PC 156
- Control de lentes 158
- Ajuste de píxel 158
- Tipo Instalación 158
- Corregir trapecio 158
- Config. display 159
- Función > Disparador 160
- Función > Modo de prueba 160
- Información 161
- Ajustes Imagen 162
- Resolución de problemas 164
- ¿Qué hacer cuando aparecen 166
- Reemplazo de la lámpara 168
- Ajuste la tapa de la lámpara 169
- W ARNING 170
- ST ANDBY/ON 170
- Retire el fi ltro interno 171
- Reinstale el fi ltro interno 171
- Limpie el fi ltro 171
- Interfaz RS-232C 172
- Montaje de la unidad 177
- Especifi caciones 178
- línea y 179
- Dimensiones 180
- LCOS PROJECTOR 182
- PROJECTEUR LCOS 182
Related products and manuals for Projectors Anthem LTX 500
Projectors Anthem LTX 300 User Manual
(174 pages)
(174 pages)
Projectors Anthem LTX 500v User Manual
(187 pages)
(187 pages)
© 2020, manymanuals.com. All rights reserved. | 1.427 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals